STIHL HL-KM 145 Long Reach Hedge Trimmer

Description

KombiEngine Long Reach Hedge Trimmer Attachment

For demanding work on high hedges and use close to the ground. Adjustment mechanism that can be set in increments, space-saving carrying position, bar length: 50 / 60 cm, total length: 148 / 158 cm. Weight: 2.3 kg

Only suitable for loop handle KombiEngines.

Flexible Reach

The STIHL HL-KM 145 degree long reach trimmer is the perfect tool for reaching high hedges. The tool works as a hedge trimmer attachment for the KombiEngine from STIHL.

The flexible long reach arm can be easily adjusted to allow you to trim in multiple positions.

Horizontal Cut

(with cutter bar at an angle)

Cutting close to the ground from a standing position, e.g. low shrubs. Swing the cutter bar up and down as you move along the hedge ? using both sides of the cutting blades.

Vertical Cut

(with cutter bar at an angle)

Cutting without standing directly next to the hedge, e.g. flowerbed between operator and hedge. Swing the cutter bar up and down in an arc as you move along the hedge ? using both sides of the cutting blades.

Vertical Cut

(with straight cutter bar)

Extra-long reach without the need for other aids. Swing the cutter bar up and down in an arc as you move along the hedge ? using both sides of the cutting blades.

Overhead Cut

(with cutter bar at an angle)

Hold the hedge trimmer vertically and swing it in an arc to make maximum use of its reach.

Horizontal Cut

(with straight cutter bar)

Hold the cutter bar at an angle of 0? to 10? as you swing the hedge trimmer horizontally. Swing the cutter bar in an arc towards the outside of the hedge so that the cuttings are swept to the ground. Recommendation: Only cut hedges that are no more than chest height.